[hts-users:01855] Re: HTS-demo_CMU-ARCTIC-SLT
See Config.pm. You can comment out & skip the phases that you have already
successfully completed there.
Nicholas
>
> Solved changed mglsadf -g to -c and -w in sox to -2 but the question is am
> i forced to rerun the make command again after changing Training.pl
> Thanks in Advanced
> Mohamed A. Saeed
> Date: Fri, 2 Jan 2009 17:23:29 +0000
> From: eng.yamany@xxxxxxxxxxx
> Subject: [hts-users:01853] Re: HTS-demo_CMU-ARCTIC-SLT
> To: hts-users@xxxxxxxxxxxxxxx
>
>
>
>
>
>
>
>
> I used the command tail and these were the last line what is the problem
>
> ge = 0.002044
> Iteration 50: GV Obj = 2.601513e+03 (HMM:2.601513e+03 GV:-1.473440e-04)
> Chan
> ge = -0.000241
> Optimization stopped by reaching max # of iterations (50).
> Generation complete - average log prob per frame = 1.254381e+02 (64397
> frames)
>
> HTK Configuration Parameters[22]
> Module/Tool Parameter Value
> OPTKIND NEWTON
> GVWEIGHT 1
> HMMWEIGHT 1
> STEPDEC 0.500000
> STEPINC 1.200000
> STEPINIT 1
> MINEUCNORM 0.010000
> GVEPSILON 0.000100
> MAXGVITER 50
> GVHMMLIST
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-SLT/HTS-
> demo_CMU-ARCTIC-SLT/models/qst001/ver1/cmp/gv.list
> GVMODELMMF
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-SLT/HTS-
> demo_CMU-ARCTIC-SLT/models/qst001/ver1/cmp/gv.mmf
> USEGV TRUE
> EMEPSILON 0.000100
> MAXEMITER 20
> WINDIR
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-SLT/HTS-
> demo_CMU-ARCTIC-SLT/data/win
> WINFN StrVec 3 mgc.win1 mgc.win2 mgc.win3
> StrVec 3 l
> f0.win1 lf0.win2 lf0.win3
> PDFSTREXT StrVec 2 mgc lf0
> PDFSTRORDER IntVec 2 25 1
> PDFSTRSIZE IntVec 2 1 3
> USEALIGN TRUE
> NATURALWRITEORDER TRUE
> NATURALREADORDER TRUE
>
>
> =====================================================================
> Start synthesizing waveforms (1mix) at Fri Jan 2 07:59:14 EST 2009
> =====================================================================
>
> Processing directory
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-SLT/HTS-demo_CMU-ARCT
> IC-SLT/gen/qst001/ver1/1mix/0:
> Synthesizing a speech waveform from alice01.mgc and alice01.lf0...mglsadf
> : Inv
> alid option 'g'!
>
> mglsadf - MGLSA digital filter for speech synthesis
>
> usage:
> mglsadf [ options ] mgcfile [ infile ] > stdout
> options:
> -m m : order of mel-generalized cepstrum [25]
> -a a : alpha [0.35]
> -c c : gamma = -1 / (int) c [1]
> -p p : frame period [100]
> -i i : interpolation period [1]
> -t : transpose filter [FALSE]
> -k : filtering without gain [FALSE]
> -P P : order of Pade approximation [4]
> -h : print this message
> infile:
> filter input (float) [stdin]
> stdout:
> filter output (float)
> mgcfile:
> mel-generalized cepstrum (float)
> notice:
> if c==0, MLSA filter is used, P should be 4 or 5
>
> SPTK: version 3.2
> CVS Info: $Id: mglsadf.c,v 1.23 2008/11/06 15:40:51 tatsuyaito Exp $
> /bin/sox-14.2.0/sox-14.2.0/sox: invalid option -- w
> Failed: invalid option
>
> /bin/sox-14.2.0/sox-14.2.0/sox: SoX v14.2.0
>
> Usage summary: [gopts] [[fopts] infile]... [fopts] outfile [effect
> [effopts]]...
>
>
> SPECIAL FILENAMES (infile, outfile):
> - Pipe/redirect input/output (stdin/stdout); use
> with -t
> -d, --default-device Use the default audio device (where available)
> -n, --null Use the `null' file handler; e.g. with synth
> effect
> -p, --sox-pipe Alias for `-t sox -'
>
> SPECIAL FILENAMES (infile only):
> "|program [options] ..." Pipe input from external program (where
> supported)
> http://server/file Use the given URL as input file (where supported)
>
> GLOBAL OPTIONS (gopts) (can be specified at any point before the first
> effect):
> --buffer BYTES Set the size of all processing buffers (default
> 8192)
> --combine concatenate Concatenate multiple input files (default for
> sox, rec)
>
> --combine sequence Sequence multiple input files (default for play)
> --effects-file FILENAME File containing effects and options
> -h, --help Display version number and usage information
> --help-effect NAME Show usage of effect NAME, or NAME=all for all
> --help-format NAME Show info on format NAME, or NAME=all for all
> --input-buffer BYTES Override the input buffer size (default: as
> --buffer)
> --interactive Prompt to overwrite output file
> -m, --combine mix Mix multiple input files (instead of
> concatenating)
> -M, --combine merge Merge multiple input files (instead of
> concatenating)
> --plot gnuplot|octave Generate script to plot response of filter effect
> -q, --no-show-progress Run in quiet mode; opposite of -S
> --replay-gain track|album|off Default: off (sox, rec), track (play)
> -R Use default random numbers (same on each run of
> SoX)
> -S, --show-progress Display progress while processing audio data
> --version Display version number of SoX and exit
> -V[LEVEL] Increment or set verbosity level (default 2);
> levels:
> 1: failure messages
> 2: warnings
> 3: details of processing
> 4-6: increasing levels of debug messages
> FORMAT OPTIONS (fopts):
> Input file format options need only be supplied for files that are
> headerless.
> Output files will have the same format as the input file where possible
> and not
> overriden by any of various means including providing output format
> options.
>
> -v|--volume FACTOR Input file volume adjustment factor (real number)
> -t|--type FILETYPE File type of audio
> -s/-u/-f/-U/-A/-i/-a/-g Encoding
> type=signed-integer/unsigned-integer/floating-
>
> point/mu-law/a-law/ima-adpcm/ms-adpcm/gsm-full-rate
> -e|--encoding ENCODING Set encoding (ENCODING in above list)
> -b|--bits BITS Encoded sample size in bits
> -1/-2/-3/-4/-8 Encoded sample size in bytes
> -N|--reverse-nibbles Encoded nibble-order
> -X|--reverse-bits Encoded bit-order
> --endian little|big|swap Encoded byte-order; swap means opposite to
> default
> -L/-B/-x Short options for the above
> -c|--channels CHANNELS Number of channels of audio data; e.g. 2 = stereo
> -r|--rate RATE Sample rate of audio
> -C|--compression FACTOR Compression factor for output format
> --add-comment TEXT Append output file comment
> --comment TEXT Specify comment text for the output file
> --comment-file FILENAME File containing comment text for the output file
>
> AUDIO FILE FORMATS: 8svx aif aifc aiff aiffc al amb au avr caf cdda cdr
> cvs cvsd
> cvu dat dvms f4 f8 fap flac fssd gsm hcom htk ima ircam la lpc lpc10 lu
> mat mat
> 4 mat5 maud nist ogg paf prc pvf raw s1 s2 s3 s4 sb sd2 sds sf sl smp snd
> sndfil
> e sndr sndt sou sox sph sw txw u1 u2 u3 u4 ub ul uw vms voc vorbis vox w64
> wav w
> avpcm wv wve xa xi
> PLAYLIST FORMATS: m3u pls
> AUDIO DEVICE DRIVERS: oss ossdsp
>
> EFFECTS: allpass band bandpass bandreject bass bend chorus compand
> contrast dcsh
> ift deemph delay dither earwax echo echos equalizer fade filter flanger
> gain hig
> hpass loudness lowpass mcompand mixer noiseprof noisered norm oops pad
> phaser pi
> tch rate remix repeat reverb reverse riaa silence spectrogram speed splice
> stat
> stretch swap synth tempo treble tremolo trim vol
>
> EFFECT OPTIONS (effopts): effect dependent; see --help-effect
> Error in /usr/local/SPTK/bin/excite -p 80
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-
> SLT/HTS-demo_CMU-ARCTIC-SLT/gen/qst001/ver1/1mix/0/alice01.pit |
> /usr/local/SPTK
> /bin/mglsadf -m 24 -p 80 -a 0.42 -g 0
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-SLT/
> HTS-demo_CMU-ARCTIC-SLT/gen/qst001/ver1/1mix/0/alice01.mgc |
> /usr/local/SPTK/bin
> /x2x +fs | /bin/sox-14.2.0/sox-14.2.0/sox -c 1 -s -w -t raw -r 16000 - -c
> 1 -s -
> w -t wav -r 16000
> /home/Mohamed/htk/HTS-demo_CMU-ARCTIC-SLT/HTS-demo_CMU-ARCTIC-
> SLT/gen/qst001/ver1/1mix/0/alice01.wav
>
>
>
>
>
>
>
>
> Date: Wed, 31 Dec 2008 19:32:57 +0000
> From: eng.yamany@xxxxxxxxxxx
> Subject: [hts-users:01852] HTS-demo_CMU-ARCTIC-SLT
> To: hts-users@xxxxxxxxxxxxxxx
>
>
>
> Dear all,
> first of all Happy new year and I thank Dr. Sacha for directing me to
> HTS-demo_CMU-ARCTIC-SLT.
> Now I have installed the demo and no errors has occurred. How can I
> synthesis speech from text. I mean how can I use the demo and run it.
> Is there a way likefestival SayText
> Thanks in Advance
> best regards
> Mohamed A.
>
>
>
>
>
>
>
> check out the rest of the Windows Live?. More than mail?Windows Live? goes
> way beyond your inbox. More than messages
>
> check out the rest of the Windows Live?.
> More than mail?Windows Live? goes way beyond your inbox.
> More than messages
> _________________________________________________________________
> Invite your mail contacts to join your friends list with Windows Live
> Spaces. It's easy!
> http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
- Follow-Ups
-
- [hts-users:01861] Re: HTS-demo_CMU-ARCTIC-SLT, Mohamed Abdou
- References
-
- [hts-users:01852] HTS-demo_CMU-ARCTIC-SLT, Mohamed Abdou
- [hts-users:01853] Re: HTS-demo_CMU-ARCTIC-SLT, Mohamed Abdou
- [hts-users:01854] Re: HTS-demo_CMU-ARCTIC-SLT, Mohamed Abdou