[Subject Prev][Subject Next][Thread Prev][Thread Next][Date Index][Thread Index]

[hts-users:02445] Re: HTS patch problem


Huang,

when I installed hts-2.1 on my machine, I commited a mistake: instead to use htk 3.4, I used 3.4.1 version and the same occurred with me. Confirms if you really are using the correct version. 

Regards.


2010/4/15 Po-Sen Huang <huang.person@xxxxxxxxx>
Hi 
My OS is  
cat /proc/version:
Linux version 2.6.18-128.1.14.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jun 17 06:38:05 EDT 2009

lsb_release -a
LSB Version:    :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: CentOS
Description:    CentOS release 5.3 (Final)
Release:        5.3
Codename:       Final

I did follow INSTALL and README step by step; however, I fail in the "patch -p1 -d . < HTS-2.1_for_HTK-3.4.patch" step.

Thanks

Sincerely,
Po-Sen

On Wed, Apr 14, 2010 at 10:23 PM, Keiichiro Oura <uratec@xxxxxxxxxxxxxxx> wrote:
Hi

What is your OS?
Anyway, read INSTALL and README in HTS-2.1_for_HTK-3.4.tar.bz2 carefully.

Regards,
Keiichiro Oura

2010/4/15 Po-Sen Huang <huang.person@xxxxxxxxx>:
> help
>
>
> Hi
> I want to ask a question, which has been discussed in archives. I have
> problem in install HTS 2.1 patch with HTK 3.4 on linux workstation.
> From archive, I cannot solve 5.1 errors.
>
> 1. Download and install cygwin
> 2. re-run the cygwin install. it will propose a list of program to install,
> I think you should at least select make, gcc and sox if they are not already
> installed.
> 3. download htk-3.4 (and hdecode) *for linux* (not windows) and HTS-2.1 (and
> hts-demo in case you want the demo)
> 4. unzip htk and hts in some cygwin folder (e.g. : open windows explorer and
> unzip them in c:\cygwin\home\mohamed)
> 5. open cygwin environment (it's a linux-like command line). Normally it
> will open with /home/mohamed as its current folder (type "pwd" to check).
> Then follow the step from hts install instruction (patch htk + ./configure +
> make + make install + the make for hdecode (the exact command-line for
> hdecode is given once the first "make" succeeds)).
> 5.1. in case the HTS patch to htk returns some errors, you will have to
> apply manually the part of the patch that didn't work (usually, it's just a
> few line to change in one or two files). This is generally due to windows.
> 5.2. in case the ./configure doesn't work, it's usually due to some missing
> component : return to step 2 and install the missing component
> 6. ...
> 7. enjoy !
>
> There are a lot of failed when I patch the HTS patch
> part of them:
>  #21 FAILED at 4339.
> Hunk #22 succeeded at 5155 with fuzz 2 (offset 557 lines).
> Hunk #23 FAILED at 5409.
> Hunk #24 FAILED at 5518.
> Hunk #25 FAILED at 5559.
> Hunk #26 succeeded at 5294 with fuzz 2.
> Hunk #27 FAILED at 5303.
> Hunk #28 FAILED at 5319.
> Hunk #29 FAILED at 5346.
> Hunk #30 FAILED at 5654.
> Hunk #31 FAILED at 6506.
> Hunk #32 FAILED at 6571.
> Hunk #33 succeeded at 7280 with fuzz 1 (offset 561 lines).
> Hunk #34 FAILED at 7303.
> Hunk #35 succeeded at 6816 (offset 10 lines).
> Hunk #36 succeeded at 7421 (offset 561 lines).
> Hunk #37 FAILED at 7872.
> Hunk #38 FAILED at 7927.
> Hunk #39 FAILED at 8134.
> Hunk #40 FAILED at 8153.
> Hunk #41 FAILED at 8164.
> 34 out of 41 hunks FAILED -- saving rejects to file configure.rej
> patching file configure.ac
> Hunk #1 FAILED at 20.
> Hunk #3 FAILED at 185.
> Hunk #4 succeeded at 256 (offset 10 lines).
> Hunk #6 succeeded at 350 (offset 10 lines).
> 2 out of 6 hunks FAILED -- saving rejects to file configure.ac.rej
> When I open one of the rejects file, I cannot figure out what's the problem
> (not CR/ CR/LF problems)
> For example, in configure.rej, :
>     $ $0 $@
> --- 1028,1034 ----
>   This file contains any messages produced by compilers while
>   running configure, to aid debugging if configure makes a mistake.
> + It was created by HTS $as_me 2.1, which was
>   generated by GNU Autoconf 2.59.  Invocation command line was
>     $ $0 $@
> ***************
> *** 1327,1332 ****
>
>
>   echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
>   echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
>   set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
> --- 1366,1376 ----
>
>
> +
> +
> +
> +
> + # Checks for programs.
>   echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
>   echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
>   set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
> ***************
> *** 1869,1970 ****
> Thank you for your help
> Po-Sen Huang
> huang.person@xxxxxxxxx
>
>
> --



--
Eng. Igor Costa do Couto
Engenharia da Computação - UFPa
LaPS - UFPa
igorcouto@xxxxxxxxx
Skype: iccouto


References
[hts-users:02441] HTS patch problem, Po-Sen Huang
[hts-users:02442] Re: HTS patch problem, Keiichiro Oura
[hts-users:02443] Re: HTS patch problem, Po-Sen Huang