I tried to access the sptk cvs
server, but failed, Could you tell me the fixed bug of mgc2mgc in the latest
SPTK? Thank you very much! > Date: Wed, 28 Nov 2012 00:55:58 +0900 > From: uratec@xxxxxxxxxxxxxxx > Subject: [hts-users:03497] Re: The synthesized waveform of HTS2.2(Straight) using LSP is silence > To: hts-users@xxxxxxxxxxxxxxx > CC: uratec@xxxxxxxxxxxx > > Hi, > > This is the information about SPTK CVS server. > http://sourceforge.net/scm/?type=cvs&group_id=176586 > > Regards, > Keiichiro Oura > > > 2012/11/28 ArthurLeo <bin007.zhao@xxxxxxxxxxx>: > > Can you supply with latest sptk?or give me some information about the address of cvs? > > > > Keiichiro Oura <uratec@xxxxxxxxxxxxxxx>编写: > > > > Hi, > > > > Could you try to use latest SPTK in sourceforge CVS server ? > > There is a bug in mgc2mgc of SPTK-3.5. > > > > Regards, > > Keiichiro Oura > > > > > > 2012/11/28 ArthurLeo <bin007.zhao@xxxxxxxxxxx>: > >> I also encounterd this problem. I checked the lsp predicted by the model, > >> found that most of LSPs 's order and the consecutive distance are normal. > >> but when I checked the parameters after mgc2sp proceessed, It became > >> abnormal, a lot of the sp are very large, such as 8.2334e+35, so I guess it > >> must > >> be something wrong. > >> > >> then I checked the parameters after LSP2LPC and MGC2MGC proceessed. The > >> parameters after LSP2LPC seem to be normal, but the parameters after > >> MGC2MGC maybe something wrong. Because the lpc parameters became very large, > >> such as 984.623. > >> > >> What is the most likely problem for LSP2LPC and mgc2mgc in general? > >> especially the lsps seem to be > >> normal? > >> > >>> Date: Wed, 21 Nov 2012 17:14:25 +0900 > >>> From: heigazen@xxxxxxxxxx > >>> Subject: [hts-users:03469] Re: The synthesized waveform of > >>> HTS2.2(Straight) using LSP is silence > >>> To: hts-users@xxxxxxxxxxxxxxx > >>> > >>> I expect > >>> > >>> 1. some generated LSPs became unstable > >>> 2. the MATLAB STRAIGHT code synthesized speech waveform in float, > >>> which became very large as filters were unstable > >>> 3. the MATLAB STRAIGHT code scaled the amplitude of speech waveform > >>> according to the maximum value while saving wav in short > >>> 4. as the maximum value was very large, almost all points in the wav > >>> file became 0 > >>> > >>> Please check the generated LSPs are stable or not. You can convert > >>> LSP into spectrum and plot it using SPTK. Please refer to the SPTK > >>> manual. > >>> > >>> Regards, > >>> > >>> Heiga > >>> > >>> > >>> > >>> 2012/11/21 北语语音组成员李伟 <blculiwei@xxxxxxxxx>: > >>> > Hi, actually the matlab and straight are fine, because if they doesn't > >>> > work, > >>> > I can't achieve synthesized wave using default settings. > >>> > BTW: I had checked the BAP file, it's not empty. > >>> > Thanks > >>> > > >>> > 2012/11/21 Thanh-Son PHAN <sonphan.hts@xxxxxxxxx> > >>> >> > >>> >> HT did not run, see B > >>> > > >>> > > >>> > > >>> > > >>> > -- > >>> > > >>> > Li wei > >>> > Department of Information Science, Beijing Language and Culture > >>> > University > >>> > Room 208a, Bulding 15, Beijing Language and Culture University, Haidian > >>> > District, Beijing,P. R. China > >>> > Post code:100083 > >>> > Mobile: 15110081848 > >>> > E-mail: blculiwei@xxxxxxxxx > >>> > > >>> > >>> > >>> > >>> -- > >>> Heiga ZEN (in Japanese) > >>> Byung Ha CHUN (in Korean) > >>> <heigazen@xxxxxxxxxx> > >>> > > > > > |