[hts-users:03625] Re: HMGenS: Segmentation fault error

[Keiichiro Oura <uratec@xxxxxxxxxxxx>]

Hi,

-t option is used for reducing CPU & memory usage.
If machine spec is low, appropriate beam width should be set.

Regards,
Keiichiro Oura


2013/2/16 NAGARAJ ADIGA <nvadigauvce@xxxxxxxxx>:
> Thanks Keiichiro Oura.
>
> This is issue is solved now. HMGenS command run successfully. But why we
> have to remove the -t option as this option is there for the set pruning.
> Please let me know the significance of this option.
>
> Regards,
> Nagaraj
>
>
> On Thu, Feb 14, 2013 at 11:16 PM, Keiichiro Oura <uratec@xxxxxxxxxxxxxxx>
> wrote:
>>
>> Hi,
>>
>> Could you try to remove -t option?
>>
>> Regards,
>> Keiichiro Oura
>>
>>
>> 2013/2/13 NAGARAJ ADIGA <nvadigauvce@xxxxxxxxx>:
>> > Hi All,
>> >
>> > I am trying to  generate speech parameter sequences (1mix) using the
>> > HMGenS
>> > with the below parameter for the HTS-demo_CMU-ARCTIC-SLT_STRAIGHT
>> > database.
>> >
>> > /usr/local/HTS-2.2beta/bin/HMGenS    -A -B -C
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/configs/syn.cnf
>> > -D -T 1 -S
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/data/scp/gen.scp
>> > -t 1500 100 5000  -c 2 -H
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/models/qst001/ver1/cmp/re_clustered_all.mmf.1mix
>> > -N
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/models/qst001/ver1/dur/re_clustered_all.mmf.1mix
>> > -M
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/gen/qst001/ver1/1mix/2
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/models/qst001/ver1/cmp/tiedlist
>> >
>> > /home/nagaraj/EMST/HTS-demo/2.2/HTS-demo_CMU-ARCTIC-SLT_STRAIGHT/models/qst001/ver1/dur/tiedlist
>> >
>> > But I am getting the segmentation fault error. Please let me know how to
>> > proceed from here.
>> >
>> > I got the below error message:
>> >
>> >  WARNING [-7324]  StepBack: Bad data or over pruning
>> >  in /usr/local/HTS-2.2beta/bin/HMGenS
>> >  WARNING [-9999]  ParamGen: failed to compute output prob in
>> > /usr/local/HTS-2.2beta/bin/HMGenS
>> >   Iteration 2: Average LogP = 1.169289e+02  Change = 0.000000
>> >   Converged (change=0.000000e+00).
>> > Segmentation fault (core dumped)
>> >
>> >
>> > Regards,
>> > Nagaraj Adiga
>> > Research Scholar
>> > Department of Electronics & Electrical Engineering
>> > Indian Institute of Technology Guwahati
>>
>